Presentations Conference 1: Smart Materials for Sustainable Production
: You can download a presentation by clicking on the PDF icon, located at the last column of the list.
N/A: Some presentations are not available, these are marked with "N/A".
PresenterOrganisationTitlePDF
- Achanta S.Falex Tribology (BE)Steps to efficient laboratory simulation of wear and lubrication issues in industrial components
- Basak A.Catholic University of Leuven (BE)Effect of nanostructuring and metallic alloying on the tribological properties of WC-12Co coatingsN/A
- Bayón Gonzalez R.Tekniker (ES)Corrosion-wear studies on PVD coatings for aeronautical applications
- Benetto E.Tudor (LU)A comparative analysis of two industrial wet-coating processes and atmospheric plasma for metal passivation
- Benveniste G.Environment Park-Clean NT Lab (IT)LCA comparative analysis of different technologies for functional coating in food applications
- Buyle G.Centexbel (BE)Functionalising textiles using environmental friendly techniques
- Coto B.Tekniker (ES)Absortion of biolubricant oxidation products in nanoporous material
- De Graeve I.VUB (BE)Comparison between wet and plasma deposition of silanes on metals for surface passivation
- De Messemaeker J.Umicore (BE)Development of a nano-sized abrasive for advanced polishing applications in IC manufacturing
- de Radiguès Q.UCL (BE)Environmental applications of low-cost porous electrodes : electro-recovery and electro-catalysisN/A
- De Strycker J.ArcelorMittal (BE)Implementing environmental friendly smart surfaces in steel sheet production
- Devriese L.VUB (BE)A new generation of hierarchical structured materials with high adsorption capacities and shape selectivity
- Dos Santos A.Ghent University (BE)Novel development in electrospinning technology for biomedical applications: bringing a lab curiosity to a pre-pilot scaleN/A
- Dubreuil M.VITO (BE)Release / adhesion enhancement of polymeric substrates using Atmospheric Plasma Technology
- Etsion I.Technion (ISR)Laser surface texturing
- Freitas F.REQUIMTE/CQFB (PT)New microbial galactose-rich polysaccharide produced from glycerol: properties and applicationsN/A
- Giorno L.ITM-CNR (IT)Membrane emulsification for the micromanufacturing of micro- nano-particulates and their applicationN/A
- Grinkevych K.IPMS (UKR)Progress in development of the Al eutectic alloys for preventing wear at elevated temperaturesN/A
- Groenen R.Bekaert (BE)A novel form of hard hydrogenated amorphous carbon for tribologic applicationsN/A
- Hai N.T.M.Catholic University of Leuven (BE)The self-assembly and reactivity of porphyrin molecules at copper/ electrolyte interfaces: a potentiodynamic electrochemical scanning tunneling microscopy studyN/A
- Hendriks M.DSM (NL)Materials Science, an enabling technology for regenerative medicineN/A
- Heyse P.VITO (BE)Organic coatings using atmospheric pressure dielectric barrier discharge: En route for a straightforward manufacture of bioactive films
- Huskens J.University of Twente (NL)Nanomaterials for bottom-up manufacturing
- Kagilik A.TU Eindhoven (NL)SiO2 dry etching with the Expanding Thermal Plasma Technique
- Kerckhofs G.Catholic University of Leuven (BE)Validation of X-ray micro-CT as screening tool for bone tissue engineering scaffolds
- Köhl M.Fz-Jülich (DE)Near-net-shape fabrication of porous NiTi: Use as implant materials and energy-absorbers
- Köhl M.Fz-Jülich (DE)Dental Implants with biocompatible and bioactive coatings
- Kuypers S.JEOL (BE)Atomic scale elemental analysis with Cs-corrected STEM
- Lauwerens W.Sirris (BE)Evaluation of surface treatments for high pressure die casting dies
- Lei S.Catholic University of Leuven (BE)Two-dimensional surface-confined nanoporous molecular networks at the solid-liquid interface: a scanning tunneling microscopy study
- Lippens E.
Ghent Univeristy (BE)Gelatin and hydroxyapatite cell delivery systems in bone tissue engineering
- Luizi F.NANOCYL (BE)Reduction of global warming potential of conductive nanocomposites using carbon nanotubes as fillerN/A
- Luyten J.VITO (BE)Porosity as a contributor to solutions for sustainable production
- Malesevic A.VITO (BE)Microwave plasma enhanced chemical vapor deposition synthesis and applications of few layer graphene
- Mampaey F.Sirris (BE)Oxygen activity measurement in cast iron as a method to improve ecological features of engines
- Mattheys T.Catholic University of Leuven (BE)Porous titanium coatings through electrophoretic deposition of particle stabilized emulsions
- Merle G.
Univ. Montpellier (FR)Biofuel cells: An alternative method for energy production?
- Messing G.Penn State University (USA)Key role of materials technology for sustainable development
- Milman Yu.V.IPMS (UKR)Production of high-strength aluminum alloys reinforced by nanosize quasicrystalline particles
- Moreno R. CSIC (ES)Design of alumina bodies with directional porosity by a freeze-casting method
- Morent R.Ghent Univeristy (BE)Medium pressure plasmas for surface modificationN/A
- Mullens S.VITO (BE)Processing and characterization of porous scaffolds for bone regeneration
- Nielsen L.Danish Technological Institute (DK)Product embedded surface sensors integrated under wear resistant coatings
- Ost W.Ghent Univeristy (BE)Evaluating self-lubricating materials for large scale bearings functioning under seawater conditions
- Put S.Umicore (BE)Nano-sized oxide powders for UV applications
- Ravelingien M.VITO (BE)Local drug delivery from bone implants
- Rombouts M.VITO (BE)Low-friction coatings on elastomers
- Santacruz I.CSIC (ES)Manufacture of porous cordierite samples using gelcasting of polysaccharides
- Schacht E.Ghent Univeristy (BE)Biodegradable scaffolds for tissue engineering prepared from crosslinkable precursors
- Schrooten J.Catholic University of Leuven (BE)Scaffolds for bone tissue engineering: design, production and evaluationN/A
- Snijkers F.VITO (BE)Materials research for sustainable energy production
- Sonnenfeld A.ETH (CH)Fast plasma surface processing of powders
- Van Bael M.Hasselt University (BE)Totally water-based synthesis routes to nanostructured metal oxides with electronic applications
- Van Der Voort P.Ghent Univeristy (BE)Hybrid and non siliceous ordered nanoporous materials; synthesis, applications and challenges
- Van Vuure A.W.Sirris (BE)Natural Fibre Composites; recent developments
- Vitchev R.VITO (BE)Growth mechanism of graphene layers deposited by microwave plasma enhanced CVDN/A
- Zajickova L.
Masaryk Univ. (CZ)Deposition of carbon nanotubes in microwave torch and their application
